| Natural Organic Fertilizer |
 | |  | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  |
Whether you’re an experienced gardener or a beginner, a nurseryman, landscaper, or farmer,
AGGRAND products produce high yields and quality growth by stimulating the biological activity in the
soil which provides a continuous release of nutrients as the plants need them.
AGGRAND products are useful during soil preparation, planting, transplanting, and plant growth. In
addition to the macronutrients, Nitrogen, Phosphorus and Potassium (N-P-K), AGGRAND products
contain micronutrients, growth hormones, chelating agents, vitamins and humus which provide a
balanced nutritional program for plants and the creatures in the soil.
AGGRAND products are different from many other products. They are formulated to give excellent
results when used for foliar feeding and root feeding. In addition, they build the soil which results
in prolific root growth and enhances top growth. The highest quality ingredients are used in AGGRAND
products in order to give the best results, because people who use them want the best possible
performance! We also understand that people who use our products need technical advice. That’s why
we have an agronomist/horticulturalist on our AGGRAND staff who works with our clients to develop
and fine tune their farming and gardening practices according to their specific needs.
This guide shows first-time AGGRAND users and AGGRAND veterans alike how to get the most out of
the products. Use this guide in developing your gardening or farming plan around the use of
AGGRAND. We’re sure you will be impressed and enjoy the rewards that our system will provide to you!
AGGRAND products produce high yields and quality growth by stimulating the biological activity in the
soil which provides a continuous release of nutrients as the plants need them.
AGGRAND products are useful during soil preparation, planting, transplanting, and plant growth. In
addition to the macronutrients, Nitrogen, Phosphorus and Potassium (N-P-K), AGGRAND products
contain micronutrients, growth hormones, chelating agents, vitamins and humus which provide a
balanced nutritional program for plants and the creatures in the soil.
AGGRAND products are different from many other products. They are formulated to give excellent
results when used for foliar feeding and root feeding. In addition, they build the soil which results
in prolific root growth and enhances top growth. The highest quality ingredients are used in AGGRAND
products in order to give the best results, because people who use them want the best possible
performance! We also understand that people who use our products need technical advice. That’s why
we have an agronomist/horticulturalist on our AGGRAND staff who works with our clients to develop
and fine tune their farming and gardening practices according to their specific needs.
This guide shows first-time AGGRAND users and AGGRAND veterans alike how to get the most out of
the products. Use this guide in developing your gardening or farming plan around the use of
AGGRAND. We’re sure you will be impressed and enjoy the rewards that our system will provide to you!
Scroll Down for information on the following:
|
Application for Bedding Plants
For commercial applications, AGGRAND Natural Fertilizer 4-3-3 is applied to the soil at a 200:1
(water to fertilizer) ratio through a standard injection system when plants reach 2 to 3 true leaves.
The ratio can be decreased to 100:1 for more demanding plant types as the growth rate increases.
AGGRAND 4-3-3 may also be diluted in a watering can to 1 to 3 ounces per gallon of water (higher
rates as growth increases related to crop demands).
Soil applications: AGGRAND 4-3-3 should be applied at 10 to 14 day intervals (apply more
frequently when non-soil mixes are used). Every four weeks the salts should be leached from the
media by flushing the containers with fresh water. After leaching, fertilize with 4-3-3. Additional
calcium, phosphorus and potassium are needed at planting. Mix in 2 to 3 ounces of AGGRAND
Natural Liquid Bonemeal 0-12-0 (NBM) and 1 to 2 ounces AGGRAND Natural Kelp and Sulfate of
Potash 0-0-8 (NKP) with the 4-3-3 to provide more nutrients.
Foliar applications: A fine mist is applied to bedding plants for additional uptake of nutrients. Apply
one to two ounces of AGGRAND 4-3-3 per gallon of water at 14 to 21 day intervals after the plants
reach 3 to 4 true leaves.
For commercial applications, AGGRAND Natural Fertilizer 4-3-3 is applied to the soil at a 200:1
(water to fertilizer) ratio through a standard injection system when plants reach 2 to 3 true leaves.
The ratio can be decreased to 100:1 for more demanding plant types as the growth rate increases.
AGGRAND 4-3-3 may also be diluted in a watering can to 1 to 3 ounces per gallon of water (higher
rates as growth increases related to crop demands).
Soil applications: AGGRAND 4-3-3 should be applied at 10 to 14 day intervals (apply more
frequently when non-soil mixes are used). Every four weeks the salts should be leached from the
media by flushing the containers with fresh water. After leaching, fertilize with 4-3-3. Additional
calcium, phosphorus and potassium are needed at planting. Mix in 2 to 3 ounces of AGGRAND
Natural Liquid Bonemeal 0-12-0 (NBM) and 1 to 2 ounces AGGRAND Natural Kelp and Sulfate of
Potash 0-0-8 (NKP) with the 4-3-3 to provide more nutrients.
Foliar applications: A fine mist is applied to bedding plants for additional uptake of nutrients. Apply
one to two ounces of AGGRAND 4-3-3 per gallon of water at 14 to 21 day intervals after the plants
reach 3 to 4 true leaves.
Transplanting
Transplanting is a stressful period for young bedding plants. Minimizing transplant shock keeps
plants growing vigorously, avoiding unnecessary setbacks which can delay flowering and reduce
yields.
AGGRAND Natural Fertilizer should be used for watering in small transplants. Shrubs and trees can
be soaked overnight in a bucket of AGGRAND 4-3-3 or 0-0-8 before transplanting. Use a mixture
of one ounce per gallon for soaking and 2 to 3 ounces per gallon of water for watering in
transplants. The addition of 1 to 2 ounces of AGGRAND 0-12-0 and 1⁄2 to 1 ounce of AGGRAND 0-
0-8 to the solution to increase phosphorus and potassium availability when watering in the
transplants will aid the fertilizer in long term root development. Avoid transplanting during the heat
of the day to avoid root desiccation (drying out). Cloudy weather is the best time to transplant.
Keep soil moist until plant root systems become well-established.
Transplanting is a stressful period for young bedding plants. Minimizing transplant shock keeps
plants growing vigorously, avoiding unnecessary setbacks which can delay flowering and reduce
yields.
AGGRAND Natural Fertilizer should be used for watering in small transplants. Shrubs and trees can
be soaked overnight in a bucket of AGGRAND 4-3-3 or 0-0-8 before transplanting. Use a mixture
of one ounce per gallon for soaking and 2 to 3 ounces per gallon of water for watering in
transplants. The addition of 1 to 2 ounces of AGGRAND 0-12-0 and 1⁄2 to 1 ounce of AGGRAND 0-
0-8 to the solution to increase phosphorus and potassium availability when watering in the
transplants will aid the fertilizer in long term root development. Avoid transplanting during the heat
of the day to avoid root desiccation (drying out). Cloudy weather is the best time to transplant.
Keep soil moist until plant root systems become well-established.
Foliar Applications
While plants do take up nutrients through their roots, they can’t always meet all of their nutrient
demands that way. For example, if soil pH is higher (more alkaline) or lower (more acidic) than
the optimum range needed for plant growth, then essential nutrients become unavailable.
Foliar feeding is a very efficient way of providing nutrients during periods of peak nutrient demands
and in situations where the soil pH level is creating a nutrient deficiency without sacrificing
performance. AGGRAND 4-3-3 and AGGRAND 0-0-8 contain concentrated kelp extract. Kelp
provides a wide array of plant nutrients, chelating agents and plant hormones. Kelp promotes
drought, heat, and cold tolerance of vegetable and flowers. They are particularly effective when
applied as foliar sprays.
With foliar applications growers adopt one of two applications methods: a calendar based
approach where feeding begins on a certain date and continues at set intervals throughout the
growing season, or an approach based on the plant’s developmental stages in which reaching a
critical stage (i.e. bud formation, first bloom, fruit set, etc.) is the cue for application. When feeding
foliarly, apply enough fertilizer solution to wet the foliage. Effectiveness of foliar applications is
increased by raising the fertilizer pH to 7.0 to promote vegetative growth and 6.0 to
promote flowering and fruit formation. After mixing the fertilizer with water, test the pH with litmus
paper. Add baking soda or hydrated lime one-half teaspoon at a time to raise the pH to the
specified level or add apple cider vinegar 1 teaspoon at a time to lower the pH to the specified
level. The addition of a surfactant (spreader-sticker) to the spray mix also increases the
effectiveness of foliar applications. Add 2 to 4 tablespoons to each gallon of spray mix and keep
well-agitated.
While plants do take up nutrients through their roots, they can’t always meet all of their nutrient
demands that way. For example, if soil pH is higher (more alkaline) or lower (more acidic) than
the optimum range needed for plant growth, then essential nutrients become unavailable.
Foliar feeding is a very efficient way of providing nutrients during periods of peak nutrient demands
and in situations where the soil pH level is creating a nutrient deficiency without sacrificing
performance. AGGRAND 4-3-3 and AGGRAND 0-0-8 contain concentrated kelp extract. Kelp
provides a wide array of plant nutrients, chelating agents and plant hormones. Kelp promotes
drought, heat, and cold tolerance of vegetable and flowers. They are particularly effective when
applied as foliar sprays.
With foliar applications growers adopt one of two applications methods: a calendar based
approach where feeding begins on a certain date and continues at set intervals throughout the
growing season, or an approach based on the plant’s developmental stages in which reaching a
critical stage (i.e. bud formation, first bloom, fruit set, etc.) is the cue for application. When feeding
foliarly, apply enough fertilizer solution to wet the foliage. Effectiveness of foliar applications is
increased by raising the fertilizer pH to 7.0 to promote vegetative growth and 6.0 to
promote flowering and fruit formation. After mixing the fertilizer with water, test the pH with litmus
paper. Add baking soda or hydrated lime one-half teaspoon at a time to raise the pH to the
specified level or add apple cider vinegar 1 teaspoon at a time to lower the pH to the specified
level. The addition of a surfactant (spreader-sticker) to the spray mix also increases the
effectiveness of foliar applications. Add 2 to 4 tablespoons to each gallon of spray mix and keep
well-agitated.
Deep Root Applications
For trees and shrubs, a surface application of fertilizer may be used up by the lawn before it can
penetrate down into the root zone of these woody perennials. Deep root feeding below the root
zone of the grass effectively provides nutrients to trees and shrubs. The ideal fertilizer for deep
root feeding is a liquid, low salt product containing chelated macro and micronutrients that
releases slowly into the root zone.
Several application methods are used for deep root feeding. All of these methods involve
penetrating the root zone around the drip line of the tree or shrub (the feeder roots form
a circle 2 to 4 ft. wide around the drip line). One method is to drill a number of holes in the ground
6 to 12 deep and pour the fertilizer into them. A second method is to rototill around the drip line
just deep enough (2 to 3) to break up the sod but not disturb many of the tree’s or shrub’s
roots. Then use a soaker hose to apply the fertilizer. A third method is to apply the fertilizer
without any previous tillage. A longer time must be allowed to effectively penetrate the root zone.
The final method uses a hollow tree spike which is pushed down into the root zone. The fertilizer is
injected through the spike. It may be impractical to use this method in highly compacted soils; in
this situation it is better to drill holes or use tillage. Tree and shrub fertilizers
are applied in the early spring or in the fall. When performing deep root feeding by injection or
through bored holes on trees and shrubs, use a grid pattern, with points every 2 or 3 feet, starting
at least a foot away from the base of the tree and extending one or two feet outside the drip line.
AGGRAND 4-3-3 should be applied at 4 to 32 ounces per tree. The ratio of water to fertilizer is 4
oz. fertilizer to one gallon of water for hand watering down to one half ounce per gallon for
injection and soaker hoses. Younger trees and shrubs and those in sandy soils need half the
above rate applied both spring and fall. AGGRAND 0-12-0 and 0-0-8 may be mixed with the 4-3-3
to provide additional calcium, phosphorus, and potassium. Apply 2 to 16 ounces of 0-12-0 and 1
to 8 ounces of 0-0-8 along with the 4-3-3 to supply additional nutrients.
For trees and shrubs, a surface application of fertilizer may be used up by the lawn before it can
penetrate down into the root zone of these woody perennials. Deep root feeding below the root
zone of the grass effectively provides nutrients to trees and shrubs. The ideal fertilizer for deep
root feeding is a liquid, low salt product containing chelated macro and micronutrients that
releases slowly into the root zone.
Several application methods are used for deep root feeding. All of these methods involve
penetrating the root zone around the drip line of the tree or shrub (the feeder roots form
a circle 2 to 4 ft. wide around the drip line). One method is to drill a number of holes in the ground
6 to 12 deep and pour the fertilizer into them. A second method is to rototill around the drip line
just deep enough (2 to 3) to break up the sod but not disturb many of the tree’s or shrub’s
roots. Then use a soaker hose to apply the fertilizer. A third method is to apply the fertilizer
without any previous tillage. A longer time must be allowed to effectively penetrate the root zone.
The final method uses a hollow tree spike which is pushed down into the root zone. The fertilizer is
injected through the spike. It may be impractical to use this method in highly compacted soils; in
this situation it is better to drill holes or use tillage. Tree and shrub fertilizers
are applied in the early spring or in the fall. When performing deep root feeding by injection or
through bored holes on trees and shrubs, use a grid pattern, with points every 2 or 3 feet, starting
at least a foot away from the base of the tree and extending one or two feet outside the drip line.
AGGRAND 4-3-3 should be applied at 4 to 32 ounces per tree. The ratio of water to fertilizer is 4
oz. fertilizer to one gallon of water for hand watering down to one half ounce per gallon for
injection and soaker hoses. Younger trees and shrubs and those in sandy soils need half the
above rate applied both spring and fall. AGGRAND 0-12-0 and 0-0-8 may be mixed with the 4-3-3
to provide additional calcium, phosphorus, and potassium. Apply 2 to 16 ounces of 0-12-0 and 1
to 8 ounces of 0-0-8 along with the 4-3-3 to supply additional nutrients.
Soil Applications
aids in the breakdown of crop residue and provides readily available nutrients from the fertilizer
and decomposed organic matter by the next year. Spring tillage with a fertilizer application
provides some readily available nutrients, but more of the nitrogen is locked up
through the decomposition of plant residue. Either way, fertilizer should be applied at planting
time for optimum results. AGGRAND 4-3-3, 0-12-0 and 0-0-8 can be applied either time. A soil
test of your garden area is beneficial in determining the most useful fertilizer combination to use.
For most gardens one quart each of AGGRAND 4-3-3, 0-12-0 and 0-0-8 tilled into 1,000 to 2,000
square feet of garden is sufficient.
Using AGGRAND products during spring soil preparation and fall tillage is straightforward. In
spring the applications are made by spray broadcasting the AGGRAND products before the final
trip over the garden and allowing them to dry before tilling in the fertilizer. In the fall the soil
should not be tilled finely or deeply, but the fertilizer application is still made before the final pass
with the tiller.
Another way AGGRAND products are used for garden crops is banding the fertilizer in a trench
near the seed. The best way to band fertilizer is to dig a trench slightly to one side and beneath
where the seed will be planted (1 to 2 below and 2 to 4 to the side of the seeds). The
fertilizer, mixed with water, is then dribbled into the trench, after which the trench is covered and a
furrow is formed next to it for the seed. Finally, fertilizer is applied to some crops by broadcasting
it before or after planting to the seedbed. Following are some guidelines for applying fertilizer
during critical development stages on various crops.
AGGRAND products may also be applied on a calendar-based approach (i.e. every week,
bi-weekly, etc.). Rates given for soil applications are for monthly fertilizations. When fertilizing
more often reduce the concentration of the mix accordingly.
aids in the breakdown of crop residue and provides readily available nutrients from the fertilizer
and decomposed organic matter by the next year. Spring tillage with a fertilizer application
provides some readily available nutrients, but more of the nitrogen is locked up
through the decomposition of plant residue. Either way, fertilizer should be applied at planting
time for optimum results. AGGRAND 4-3-3, 0-12-0 and 0-0-8 can be applied either time. A soil
test of your garden area is beneficial in determining the most useful fertilizer combination to use.
For most gardens one quart each of AGGRAND 4-3-3, 0-12-0 and 0-0-8 tilled into 1,000 to 2,000
square feet of garden is sufficient.
Using AGGRAND products during spring soil preparation and fall tillage is straightforward. In
spring the applications are made by spray broadcasting the AGGRAND products before the final
trip over the garden and allowing them to dry before tilling in the fertilizer. In the fall the soil
should not be tilled finely or deeply, but the fertilizer application is still made before the final pass
with the tiller.
Another way AGGRAND products are used for garden crops is banding the fertilizer in a trench
near the seed. The best way to band fertilizer is to dig a trench slightly to one side and beneath
where the seed will be planted (1 to 2 below and 2 to 4 to the side of the seeds). The
fertilizer, mixed with water, is then dribbled into the trench, after which the trench is covered and a
furrow is formed next to it for the seed. Finally, fertilizer is applied to some crops by broadcasting
it before or after planting to the seedbed. Following are some guidelines for applying fertilizer
during critical development stages on various crops.
AGGRAND products may also be applied on a calendar-based approach (i.e. every week,
bi-weekly, etc.). Rates given for soil applications are for monthly fertilizations. When fertilizing
more often reduce the concentration of the mix accordingly.
Root Crops
(i.e. carrots, beets, turnips)
1st application: Broadcast 2-3 oz. 4-3-3, 2-3 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on
100 sq. ft. after planting.
2nd application: Foliar feed 4-6 weeks after emergence with 2 oz. 4-3-3 in 1 gal. of water.
3rd application: Repeat foliar application 3-4 weeks later.
Soil applications: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime, and 1-2 oz. 0-0-8 in 1 gal. of water on
10-20 ft. of row or 30-100 sq. ft.
Tubers and Tuberous Root Crops
(i.e. potato, sweet potato, yam)
1st application: Band 3-4 oz. 4-3-3, 2-3 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 10-20
ft. of row during planting.
2nd application: Foliar feed 2 weeks after emergence with 2-3 oz. 4-3-3 and 1-2 oz. Liquid Lime
in 1 gal. of water.
3rd application: Repeat 2nd application 2 weeks later (for baby red potatoes use an additional
application 4 weeks later).
4th application: Repeat foliar application 6 weeks after 3rd application.
Soil application: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime, and 1-2 oz. 0-0-8 in 1 gal. of water on
10-15 ft. of row.
Leaf Crops
(i.e. lettuce, celery, spinach)
1st application: Band 3-4 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 10-20 ft. of row or
30-60 sq. ft. during planting.
2nd application: Foliar feed 2-3 weeks after transplanting with 2 oz. 4-3-3 in one gal. of water.
3rd application: Repeat 2nd application every 3-4 weeks until harvest.
Soil applications: Use 2-3 oz. 4-3-3 and 2-3 oz. Liquid Lime in 1 gal. of water on 15-20 ft. of row
or 45-60 sq. ft.
Cole Crops
(i.e. cabbage, broccoli, cauliflower)
1st application: Broadcast 3-4 oz. 4-3-3, in one gal. of water on 100 sq. ft. before final seedbed
application.
2nd application: Foliar feed 2-3 weeks after transplanting with 2 oz. 4-3-3 in one gal. of water.
3rd application: Repeat foliar feed when plants begin to head.
Soil applications: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime per gal. of water on 5-10 sq. ft. of row.
Solanaceous Crops
(i.e. tomato, pepper, eggplant)
1st application: Band 3-4 oz. 4-3-3, 3-4 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 10-20
ft. of row before transplanting.
2nd application: Foliar feed at 1st bloom with 2 oz. 4-3-3 and 1-2 oz. 0-12-0 in 1 gal. of water.
3rd application: Repeat 2nd application at full bloom. Substitute Liquid Lime for 0-12-0.
4th application: Foliar feed during fruit fill with 1-2 oz. 0-0-8 in 1 gal. of water on 10-15 ft. of row.
Soil application: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime, and 1-2 oz. 0-0-8 in 1 gal. of water on
10-15 ft. of row.
Legumes
(i.e. beans, peas, lima beans)
1st application: Band 1-2 oz. 4-3-3, 2-3 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 20-30
ft. of row during planting.
2nd application: Foliar feed 1 week before 1st bloom (when terminal leaves are shiny) with 1-2
oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water.
3rd application: Repeat foliar feed before 2nd flush of blooms on string beans.
Soil application: Use 1-2 oz. 4-3-3, 1-2 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 15-20
ft. of row.
Cucurbits
(i.e. cucumber, squash, melon)
1st application: Band 2-3 oz. 4-3-3, 1-2 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 15-20
ft. of row or 4 hills at planting.
2nd application: Foliar feed 2-3 weeks after emergence with 2-3 oz. 4-3-3 in 1 gal. of
water.
3rd application: Repeat 2nd application when plants begin to run.
4th application: Repeat 2nd application when the first bloom appears.
5th application: Foliar feed during fruit fill up to 2 weeks before final harvest with 1-2 oz. 0-0-8 in
1 gal. of water.
Soil applications: Use 2-3 oz. 4-3-3 in 1 gal. of water on 10-20 ft. of row or 50-100 sq. ft.
Small Fruits
Strawberry:
1st application: Foliar feed in early spring after leaf formation with 2-3 oz. 4-3-3 in 1 gal. of
water (only if leaves are light green to yellow) otherwise use 1-2 oz. 0-0-8.
2nd application: Foliar feed in late summer with 1-2 oz. 4-3-3 in 1 gal. of water.
New Planting: Broadcast 3-4 oz. 4-3-3, 3-4 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water
on 100 sq. ft. before final seedbed preparation. Water in transplants with 2-3 oz. 4-3-3 or 1-2 oz.
0-0-8 in 1 gal. of water on 10-15 ft. of row.
Blueberry:
1st application: Broadcast 2-3 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. (on mulch around
plants) as buds begin to swell in spring.
2nd application: Repeat 1st application only if leaves are light green or one year old stems
less than 6 inches in length.
3rd application: Foliar feed in late summer after harvest with 1-2 oz. 4-3-3 in 1 gal. of water on
bushes with low vigor as explained under 2nd application above.
New Planting: Broadcast 1-2 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. (on mulch around bushes)
after transplanting when new growth appears.
Raspberry:
1st application: Broadcast 2-3 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 100 sq. ft. in
early spring.
2nd application: Repeat 1st application in monthly intervals up to harvest.
3rd application: Broadcast 2-3 oz. 4-3-3, 2-3 oz. 0-12-0, 1-2 oz. 0-0-8 on 100 sq. ft.
after final harvest. Till into soil with organic matter or cover crop.
New Planting: Use same rates given under 3rd application.
Grapes:
1st application: Broadcast 2-3 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 100 sq. ft. in
early spring.
2nd application: Foliar feed in spring after leaf formation with 2-3 oz. 4-3-3 and/or 1-2 oz. 0-0-8
in 1 gal. of water (use 4-3-3 only if leaves are light green to yellow and vines lack vigor).
3rd application: Foliar feed with 1-2 oz. 0-0-8 in 1 gal. of water in monthly intervals up to
harvest. Till into soil with organic matter or legume cover crop.
4th application: Repeat 1st application in fall after harvest. Till into soil with organic matter or
legume cover crop.
New Planting: Use same rates given under 1st application. Pour some of the fertilizer solution
into the bottom of the planting hole.
Fruit Trees
Apple and Pear:
1st application: Foliar feed in spring after leaf formation with 2-3 oz. 4-3-3 in 1 gal. of water.
2nd application: Foliar feed during fruit set with 1-2 oz. 4-3-3 in 1 gal. of water.
3rd application: Foliar feed during fruit fill with 1-2 oz. 0-0-8 in 1 gal. of water. Add additional 1-2
oz. of Liquid Lime where bitter pit is problematic.
4th application: Broadcast 2-3 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. in fall harvest or in early
spring. Till into soil with organic matter or cover crop.
New Planting: Use same rates given under 4th application. Pour some of the fertilizer solution
into the bottom of the planting hole.
Cherry and Peach:
1st application: Broadcast 2-3 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 100 sq. ft. in fall
after harvest or in early spring. Till into soil with organic matter or cover crop.
2nd application: Foliar feed during fruit set with 2-3 oz. 4-3-3 in 1 gal. of water.
New Planting: Use same rates given under 1st application. Add an additional 2-3 oz. 0-12-0 to
fertilizer solution. Pour some of the fertilizer solution into the the bottom of the planting hole.
Citrus:
1st application: Broadcast 3-4 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. in spring.
2nd application: Foliar feed during pre-bloom period with 2-3 oz. 4-3-3 in 1 gal. of water.
3rd application: Repeat 2nd application after petals fall.
4th application: Repeat 2nd application during fruit formation.
5th application: Foliar feed during fruit fill 1-2 oz. 0-0-8 in 1 gal. of water.
6th application: Repeat 1st application in fall after harvest.
New Planting: Use same rates given under 1st application. Pour some of the fertilizer solution
in to the bottom of the planting hole.
Houseplants
Summer: Saturate soil with 2-3 oz. 4-3-3 in 1 gal. of water every 2-4 weeks. (fertilize less often on
slow growing plants such as succulents and cacti).
Winter: Use same rates but fertilize every 4 to 8 weeks.
Spring and Fall: Flush pots with plenty of fresh water and fertilize with 2-3 oz. 4-3-3 and 2-3 oz.
0-12-0 in 1 gal. of water 2-3 days after flushing pots.
Flowering Plants: Add 2-3 oz. 0-12-0 to the fertilizer tea at first sign of bloom or at the beginning
of bloom season if known.
(i.e. carrots, beets, turnips)
1st application: Broadcast 2-3 oz. 4-3-3, 2-3 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on
100 sq. ft. after planting.
2nd application: Foliar feed 4-6 weeks after emergence with 2 oz. 4-3-3 in 1 gal. of water.
3rd application: Repeat foliar application 3-4 weeks later.
Soil applications: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime, and 1-2 oz. 0-0-8 in 1 gal. of water on
10-20 ft. of row or 30-100 sq. ft.
Tubers and Tuberous Root Crops
(i.e. potato, sweet potato, yam)
1st application: Band 3-4 oz. 4-3-3, 2-3 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 10-20
ft. of row during planting.
2nd application: Foliar feed 2 weeks after emergence with 2-3 oz. 4-3-3 and 1-2 oz. Liquid Lime
in 1 gal. of water.
3rd application: Repeat 2nd application 2 weeks later (for baby red potatoes use an additional
application 4 weeks later).
4th application: Repeat foliar application 6 weeks after 3rd application.
Soil application: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime, and 1-2 oz. 0-0-8 in 1 gal. of water on
10-15 ft. of row.
Leaf Crops
(i.e. lettuce, celery, spinach)
1st application: Band 3-4 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 10-20 ft. of row or
30-60 sq. ft. during planting.
2nd application: Foliar feed 2-3 weeks after transplanting with 2 oz. 4-3-3 in one gal. of water.
3rd application: Repeat 2nd application every 3-4 weeks until harvest.
Soil applications: Use 2-3 oz. 4-3-3 and 2-3 oz. Liquid Lime in 1 gal. of water on 15-20 ft. of row
or 45-60 sq. ft.
Cole Crops
(i.e. cabbage, broccoli, cauliflower)
1st application: Broadcast 3-4 oz. 4-3-3, in one gal. of water on 100 sq. ft. before final seedbed
application.
2nd application: Foliar feed 2-3 weeks after transplanting with 2 oz. 4-3-3 in one gal. of water.
3rd application: Repeat foliar feed when plants begin to head.
Soil applications: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime per gal. of water on 5-10 sq. ft. of row.
Solanaceous Crops
(i.e. tomato, pepper, eggplant)
1st application: Band 3-4 oz. 4-3-3, 3-4 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 10-20
ft. of row before transplanting.
2nd application: Foliar feed at 1st bloom with 2 oz. 4-3-3 and 1-2 oz. 0-12-0 in 1 gal. of water.
3rd application: Repeat 2nd application at full bloom. Substitute Liquid Lime for 0-12-0.
4th application: Foliar feed during fruit fill with 1-2 oz. 0-0-8 in 1 gal. of water on 10-15 ft. of row.
Soil application: Use 2-3 oz. 4-3-3, 2-3 oz. Liquid Lime, and 1-2 oz. 0-0-8 in 1 gal. of water on
10-15 ft. of row.
Legumes
(i.e. beans, peas, lima beans)
1st application: Band 1-2 oz. 4-3-3, 2-3 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 20-30
ft. of row during planting.
2nd application: Foliar feed 1 week before 1st bloom (when terminal leaves are shiny) with 1-2
oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water.
3rd application: Repeat foliar feed before 2nd flush of blooms on string beans.
Soil application: Use 1-2 oz. 4-3-3, 1-2 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 15-20
ft. of row.
Cucurbits
(i.e. cucumber, squash, melon)
1st application: Band 2-3 oz. 4-3-3, 1-2 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water on 15-20
ft. of row or 4 hills at planting.
2nd application: Foliar feed 2-3 weeks after emergence with 2-3 oz. 4-3-3 in 1 gal. of
water.
3rd application: Repeat 2nd application when plants begin to run.
4th application: Repeat 2nd application when the first bloom appears.
5th application: Foliar feed during fruit fill up to 2 weeks before final harvest with 1-2 oz. 0-0-8 in
1 gal. of water.
Soil applications: Use 2-3 oz. 4-3-3 in 1 gal. of water on 10-20 ft. of row or 50-100 sq. ft.
Small Fruits
Strawberry:
1st application: Foliar feed in early spring after leaf formation with 2-3 oz. 4-3-3 in 1 gal. of
water (only if leaves are light green to yellow) otherwise use 1-2 oz. 0-0-8.
2nd application: Foliar feed in late summer with 1-2 oz. 4-3-3 in 1 gal. of water.
New Planting: Broadcast 3-4 oz. 4-3-3, 3-4 oz. 0-12-0, and 1-2 oz. 0-0-8 in 1 gal. of water
on 100 sq. ft. before final seedbed preparation. Water in transplants with 2-3 oz. 4-3-3 or 1-2 oz.
0-0-8 in 1 gal. of water on 10-15 ft. of row.
Blueberry:
1st application: Broadcast 2-3 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. (on mulch around
plants) as buds begin to swell in spring.
2nd application: Repeat 1st application only if leaves are light green or one year old stems
less than 6 inches in length.
3rd application: Foliar feed in late summer after harvest with 1-2 oz. 4-3-3 in 1 gal. of water on
bushes with low vigor as explained under 2nd application above.
New Planting: Broadcast 1-2 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. (on mulch around bushes)
after transplanting when new growth appears.
Raspberry:
1st application: Broadcast 2-3 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 100 sq. ft. in
early spring.
2nd application: Repeat 1st application in monthly intervals up to harvest.
3rd application: Broadcast 2-3 oz. 4-3-3, 2-3 oz. 0-12-0, 1-2 oz. 0-0-8 on 100 sq. ft.
after final harvest. Till into soil with organic matter or cover crop.
New Planting: Use same rates given under 3rd application.
Grapes:
1st application: Broadcast 2-3 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 100 sq. ft. in
early spring.
2nd application: Foliar feed in spring after leaf formation with 2-3 oz. 4-3-3 and/or 1-2 oz. 0-0-8
in 1 gal. of water (use 4-3-3 only if leaves are light green to yellow and vines lack vigor).
3rd application: Foliar feed with 1-2 oz. 0-0-8 in 1 gal. of water in monthly intervals up to
harvest. Till into soil with organic matter or legume cover crop.
4th application: Repeat 1st application in fall after harvest. Till into soil with organic matter or
legume cover crop.
New Planting: Use same rates given under 1st application. Pour some of the fertilizer solution
into the bottom of the planting hole.
Fruit Trees
Apple and Pear:
1st application: Foliar feed in spring after leaf formation with 2-3 oz. 4-3-3 in 1 gal. of water.
2nd application: Foliar feed during fruit set with 1-2 oz. 4-3-3 in 1 gal. of water.
3rd application: Foliar feed during fruit fill with 1-2 oz. 0-0-8 in 1 gal. of water. Add additional 1-2
oz. of Liquid Lime where bitter pit is problematic.
4th application: Broadcast 2-3 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. in fall harvest or in early
spring. Till into soil with organic matter or cover crop.
New Planting: Use same rates given under 4th application. Pour some of the fertilizer solution
into the bottom of the planting hole.
Cherry and Peach:
1st application: Broadcast 2-3 oz. 4-3-3 and 1-2 oz. 0-0-8 in 1 gal. of water on 100 sq. ft. in fall
after harvest or in early spring. Till into soil with organic matter or cover crop.
2nd application: Foliar feed during fruit set with 2-3 oz. 4-3-3 in 1 gal. of water.
New Planting: Use same rates given under 1st application. Add an additional 2-3 oz. 0-12-0 to
fertilizer solution. Pour some of the fertilizer solution into the the bottom of the planting hole.
Citrus:
1st application: Broadcast 3-4 oz. 4-3-3 in 1 gal. of water on 100 sq. ft. in spring.
2nd application: Foliar feed during pre-bloom period with 2-3 oz. 4-3-3 in 1 gal. of water.
3rd application: Repeat 2nd application after petals fall.
4th application: Repeat 2nd application during fruit formation.
5th application: Foliar feed during fruit fill 1-2 oz. 0-0-8 in 1 gal. of water.
6th application: Repeat 1st application in fall after harvest.
New Planting: Use same rates given under 1st application. Pour some of the fertilizer solution
in to the bottom of the planting hole.
Houseplants
Summer: Saturate soil with 2-3 oz. 4-3-3 in 1 gal. of water every 2-4 weeks. (fertilize less often on
slow growing plants such as succulents and cacti).
Winter: Use same rates but fertilize every 4 to 8 weeks.
Spring and Fall: Flush pots with plenty of fresh water and fertilize with 2-3 oz. 4-3-3 and 2-3 oz.
0-12-0 in 1 gal. of water 2-3 days after flushing pots.
Flowering Plants: Add 2-3 oz. 0-12-0 to the fertilizer tea at first sign of bloom or at the beginning
of bloom season if known.
| Garden Guide |
All Service Oil Lawn ∙ Garden ∙ Agriculture 763.434.1544 or 763.257.3130 www.naturalorganicfertilizer.net |
| Copyright 2009 All Service Oil All Rights Reserved |